More About Floating Selvedges

Ask Madelyn

More about floating selvedges…

In last week’s post, I recommended entering each shed by passing the shuttle over the floating selvedge and exiting the shed by passing the shuttle under it. I pointed out that sometimes this order causes the last thread in the warp to weave with the adjacent floating selvedge on one side, thereby producing a doubled thread on that edge. By changing the shuttle’s behavior, I pointed out, you can eliminate the doubled thread (either by going over both floating selvedges in one direction and then under both floating selvedges in the opposite direction or the reverse of that). I thought it might be hard in that case always to remember which one you were supposed to do next. (What was I thinking!)

It's not always easy to figure out how you should weave your floating selvedge so it looks the most seamless and even.
Photo A: Left Selvedge
Sometimes you floating selvedge will double up with your edge warp thread in an unsightly way.
Photo B: Doubled
Simply weaving your floating selvedge a different way can ensure your weaving selvedges always look crisp, even, and smooth.
Photo C: Fixed

This situation came up in my very next warp. In Photo B, on the right side of the cloth, the edge warp thread weaves with the floating selvedge, and the contrast in warp and weft colors causes the doubling to show. To shift the shuttle’s behavior to avoid this doubling, I passed the shuttle over both floating selvedges when entering the shed from the left and under both floating selvedges when entering the shed from the right. In order to exit over a floating selvedge, I had to lower it with a finger of my catching hand, but this turned out to be easy to do and became automatic in a short time. The easiest part was remembering which one to do: over both from the left, under both from the right.

4606.sig_2D00_madelyn_2D00_van_2D00_der_2D00_hoogt.jpg

Other items you may enjoy:

Categories

Ask Madelyn

Comment