How to Expand Your Weaving Comfort Zone

The end of this month of May will mark my five-year anniversary with Handwoven. It’s hard to believe that when I started, I had just one weaving class under my belt and couldn’t imagine owning a floor loom any time soon, much less two. I knew I loved weaving, and I was excited to explore as much as I could. As ready as I was to jump in and see what I could do, I also realized I needed to expand my weaving comfort zone at a reasonable pace. There’s no better way to get burnt out on something you love than setting your aim higher than your ability. So I started slow and with each new project, structure, and technique, my confidence grew and so did my love for weaving.

Pinwheels Napkins
Two-shuttle napkins designed by Christina, from the May/June 2014 issue of Handwoven

(Now, that said, sometimes it is good to be oblivious to what’s considered difficult. For example, I only found out after I did my first two-shuttle weave that two-shuttle weaves are supposed to be tricky, especially if you have to do special tricks at the selvedges. I didn’t know any better so I just boldly blustered ahead and as a result I have no fear of weaving with two shuttles.)

I had this particular lesson called to mind this weekend. I recently acquired a new, wider loom, the story of which I’ll be sure to tell later. Unfortunately for me, I have at least two more projects (and possibly three at this point) scheduled on my other looms before I can start playing with my new 40-inch weaving width. Fortunately for my husband, that meant he could start plotting and planning to weave a rug—something he’s wanted to do for a while. I gave him some resources on rug weaving and he poured through them as I finished up a set of Finnish twill tea towels.

He knew he wanted to weave with yarn rather than rags, and wanted a loom-controlled weave if possible in lieu of having to use clasped weft and other hand-manipulated techniques. While looking through Handwoven back-issues, he spotted a rug that used shaft switching. He wanted to know more, but once he learned about this design technique, he wondered to me why anyone would do something so complicated.

For a minute, I flashed back to five years ago when anything other than twill scared me. When the idea of designing anything more complicated than a tea towel would have been nerve wracking. When I shuddered at the thought of trying to warp something slippery like silk. I told him that I wouldn’t suggest it right now, but after a project or two he might become so comfortable at the loom that what once looked complicated is now enticing. Or maybe he’ll want to get more design boom for his buck and give it a try and find out it’s not that bad once you learn how to do it.

Because that is a big part of weaving and other creative endeavors: growing and expanding your comfort zone. Learning new techniques to take your designs and your cloth further. For different weavers, the rate at which you expand your repertoire can be vastly different. Some weavers might weave nothing but twill in 8/2 cotton for years, while others will weave one beginners project and immediately jump into complex weaving.

Fortunately for all of us, there are so many wonderful resources available as we wish to grow. We have weaving guilds where we can take workshops and learn from fellow weavers with more (or just different) experience. We can read the many wonderful books on general weaving and specific techniques. We have blogs and websites galore where we can connect with weavers from around the world. We also have videos where we can learn from experts in their specific fields, from Tom Knisely to Madelyn van der Hoogt to Rosalie Neilson. Most recently, Liz Gipson just released a video on using two heddles to weave doubleweave on the rigid-heddle loom. Imagine the possibilities!

doubleweave two heddles
Liz Gipson demonstrating how to use two heddles to create doubleweave on a rigid-heddle loom. Weave fabric twice as wide as your loom, or create sewing-free tubes for bags, pockets, pillows, and more.

Every time I’m at the loom happily weaving away, I tend to think back to Past Me, and smile. I knew back then that even though I was new and I was nervous that someday I would learn the language of my loom and a whole world would open up. I’m happy to say I wasn’t wrong.

Happy Weaving!

christina_sig
P.S. What do you do to expand your weaving comfort zone? Do you jump in headfirst? Do lots of research first? Ask an expert? Let me know in the comments!

Other items you may enjoy:

Categories

Blogs
Christina Garton

About Christina Garton

I'm Associatet Editor for Handwoven where I get to interact daily with all sorts of wonderfully creative people. I'm obsessed with twill and weaving dishtowels, although I'm also in love with deflected doubleweave. When I'm not weaving twill towels, I love to try out new fibers and structures and blog about it as I go!

7 thoughts on “How to Expand Your Weaving Comfort Zone

  1. I learned to use THREE shuttles doing a “pinwheel” weave (from Rigid Heddle Weaving-http://rigidheddleweaving.com/articles/plain-weave-that-s-not-so-plain) using “Christmas-y” colors in coasters a couple of years ago on my RH loom before I got a floor loom. I had to ‘teach’ myself how to wrap the yarns around each other on the end of the selvage. So, using TWO shuttles is a “piece of cake” 🙂

  2. Just started weaving in sept…… Im a headfirst, I know I can do it kinda weaver and every “failure is a learning opportunity”!!! I’m on project number 22 and in my 8 th week did a 4 shuttle shawl….. Granted it was fuzzy yarn and therefore very forgiving at the selvages

  3. Hi,

    I think – read about – understand the structure – find a pattern you like (if you can) then do it. If it goes wrong – is is only thread and time – but most likely it won’t go wrong. I have been weaving 3 years, and love to try new weaves / structures.
    Andrew
    Sydney – Australia

  4. In geaeneral I’m a jump right in girl, too. If I don’t know that I can’t do it, I’ll assume that I can. This does, however, assume that I can understand the directions. So, for example, the first several times I read the directions for how to do doubleweave I could not understand them at all. Suddenly the light bulb lit up – while I was in the shower – and I flew to the loom still dripping to try it out. Voila! No class, video, or other instruction needed – I was off and running – er, weaving.

    The downside of this style is that I often don’t know the correct terminology for things. I may well know how to do something without knowing what it’s called.

Comment